Use and Care Manual

Equipment Operation

Air Injection Venturi Adjustment

Air injection into the massage jet water flow may be controlled by turning the venturi dials located on either side of

the spa.

Surface Skim Filter

The spa’s automatic surface skim filter is designed to remove floating debris and contaminants such as body lotions by

drawing water through a specially formulated filter cartridge. It is critical that this element

be routinely cleaned.

Cleaning the Filter Cartridge

To clean the filter cartridge follow these steps:

1. Turn off power to the spa.

2. Remove the end nut by turning it counter clockwise (Fig 5).

3. Pull up filter cartridge (Fig 5).

4. Remove the cartridge and thoroughly rinse with a garden hose until the cartridge is free of dirt and debris.

5. Return the clean cartridge to the filter well and turn the end nut clockwise until snug.

Fig 5