Use and Care Manual

19
Glossary of Terms
Venturi dials
Mounted on the lip of the spa or at the equipment shroud, to induce air to the jets.
BYPASS CHECK VALVE
Prevents water flow stoppage due to dirty filter.
CONTROL BOX
Basically the brain of the spa. Power is distributed to all functions of the spa, pumps, lights, heat, etc.
DRAIN VALVE
Used in the draining of the spa, looks like an outdoor faucet and fits a standard garden hose.
FILTER
The filter cleans the spa and removes particles and debris and protects the equipment from foreign substances.
FOOTWELL
The bottom of a spa where you place your feet.
GFCI PLUG
The electronic switch installed at the end of the power cord to connect to an electrical wall outlet.
HEATER The thermostatically controlled heater raises the temperature of the water to the desired degree. This is
located under the control box in the equipment area.
JETS
The fittings on your spa that direct the flow of water for massaging action.
pH
Stands for “Potential for Hydrogen” This is the term used to describe the acid (low pH) or alkalinity (high pH) condition
of the water. The ideal pH for spa water is 7.5.
SKIMMER The skimmer removes surface debris to the filter. The water level in the spa should be kept at the proper
range for optimum skimmer operation.
TOP CONTROL PANEL
Mounted on the lip of the spa. The digital panel that controls the spas functions.