Installation Guide

Site Selection
Surface Suggestions:
Travertine
Synthetic
Wood
Stone/Slate
Brick Pavers
Cement
Stained
Cement
Packed
Gravel
Provide a solid load-bearing site:
● The site must provide a solid foundation with a minimum load bearing capacity of 34
kg per 929 sq. cm (75 pounds per square foot).
● Concrete slabs and decks must be designed to support this weight. Do not select a
site composed of individual unsupported bricks, blocks, or other materials which will
shift unevenly and cause damage to your spas internal frame.
● Provide a level, flat site:
○ A level site is critical to both the performance and enjoyment of your spa. Water
is unforgiving and will always settle level. A flat and level site provides the
surface necessary to properly dispense weight between the foot well (which
bears most of the spa’s weight) and the structural frame which primarily
provides stabilization and secondary support.
● The importance of proper support for the foot well in conjunction with the spa
cabinet cannot be overstressed.