Installation Guide

13
13
Note: See the safety secon.
As described, all components of the ltraon system
should be placed to prevent a child to climb on top
and gain access to the pool.
Using a lile bit of stone dust (or sand), level a 61 cm
x 76 cm (24” x 30”) pao stone before installing the
motor and lter.
Posion the motor on the stone and insert the two
nozzles to connect the hoses.
Then, install the lter tank. Adjust the lateral assem-
bly properly in its channel.
It is somemes necessary to install the laterals.
Patch the center hole of the lateral assembly using
the plug to allow ltering sand to ow into the tank.
Remove plug. Install joint in cavity and secure lter
head by placing back wash posion on opposite side
of the pool.