Installation Guide
14
14
Insert threaded nozzles, if applicable, in order to be
able to screw the valve in the skimmer.
Connect the drain hose to the boom nozzle. Con-
nect the motor hose to the side nozzle.
The threads on all threaded nozzles must be cov-
ered with teon tape prior to installing in order to
prevent water leaks. Teon is applied to the
threads as follows: lile or none on the rst few
threads (to facilitate introducon) and several lay-
ers towards the end threads (for beer waterght-
ness).
Install necessary nozzles. Then, connect hoses collars.
1-The rst hose goes from the top of the pump to the side
of the lter head.
2– The second one goes from the motor to the skimmer (or
to the boom drain valve).
3– The third goes from the front to the lter head o the
water return or from the front of the chlorinator to the
water return.
A back wash hose may be placed behind the lter head.
If there is a chlorinator and/or heat pump, they must be
assembled at the lter outlet.