Installation Instructions AQ-4000 Countertop Water Filter White, Black, and Brushed Steel finishes
Contents Filter unit with snap-on cover Threaded cartridge caps (A & B) and “O” rings pre-installed in filter unit Filter cartridges (A & B) preinstalled in filter unit (Model no. AQ-4035) Faucet diverter valve and hose assembly Brass faucet adapters (2 sizes), rubber washers* and install tool (not included in or covered by the system certification) Model: AQ-4000 Replacement cartridge: AQ-4035 Rated service flow: 0.5 gpm Max working pressure: 80 psi (5.62 kg/cm) Min working pressure: 20 psi (1.
Easy to install 1. Remove your aerator and attach the diverter valve in its place. (Use included brass adapter if required.) 2. White A - White cap Push the hoses into the filter. (A-cap) B - Blue cap 3. Turn on the diverter valve, flush the filter for 10 min and enjoy! AQ-4000 in white finish For the first 72 hours, the faucet diverter valve will drip intermittently, until the filters become fully saturated.
Operating Your filter comes pre-assembled with cartridges you won’t need to change for six months, or 450 gallons. Turn on cold water. Pull pin on diverter valve for clean water. Turn water off when done. If pull pin does not retract, push pin in once water is off. Precautions: Pure Satisfaction Aquasana is not liable for consequential or incidental damages due to improper installation. • Filter is only to be used with cold water.
Aquasana, Inc. 6310 Midway Road Haltom City, TX 76117 866.662.6885 USA 877.332.7873 Canada aquasana.com For exclusive deals facebook.com/aquasana twitter.