Instructions / Assembly

Installation

. SELECT A MOUNTING LOCATION

• Manifold should be mounted directly to a ﬂat surface ensuring cartridge[s] have enough space

to hang vertically

• Mounting location should allow for a minimum clearance of ½ inches for easy cartridge

removal and replacement

• Provide adequate space on both sides for plumbing installation and system ﬂushing

. INSTALL GAUGES

• Systems with 3 or more stages will have two gauges: one at the inlet port and one at the outlet port

• Single and 2-stage systems will have one gauge at outlet port only

• Attach stainless steel collar reinforcement over valve stem, then install gauge to system

Collar reinforcement must be used; otherwise, system may be damaged

. INSTALL TADAPTER AND DRAIN SHUTOFF VALVE ONTO OUTLET PORT ¾” NPT

• Use Teﬂon

tape around threads of outlet port

. INSTALL MANIFOLD ONTO WALL

• Use a level and predrilled mounting holes in the manifold bracket as guides

• Align, mark, and drill anchor holes

• Ensure manifold is level and mounted securely

First, place collar on

the valve stem.

Then, install the gauge.

Inlet gauge goes

on front pipe.

Outlet gauge

goes on back pipe.

CAUTION!

DO NOT

OVER-TIGHTEN

gauges or

connections