Use and Care Manual

11
DISPLAY FAULT MODES
LED display reads
“A3”
• lamp life expired - countdown is at “0” days
• press reset button for a deferred alarm, replace UV lamp
LED display is
blank
• controller is in lamp failure mode
• power system down, allowing it to reset itself; apply power in order to
confirm that the controller is able to power lamp
• check to see if there is sufcient power to the UV system
Dose Flow Chart:
0
5
10
15
20
25
30
35
40
0 5 10 15 20 25 30 35 40 45
FLOWRATE(U.S.gpm)
UVDOSE(FLUENCE)(mJ/cm
2
)
SC200A
SC410A
Note:dosagesbasedon95%UVTatendoflamplife(0.80EOLL)
`
1966
USPublic
Health
Manufacturers
Standard
NSF/EPA
Standard
AquaSanaSeriesDoseChart:
E.Colieradicated
at6.6mJ/cm
2
Cryptosporidium&Giardia
eradicatedat<10mJ/cm
2