Installation Guide

6
Lowes.com
ASSEMBLY INSTRUCTIONS
Apply silicone sealant (not included) to the underside of
the (N).
8
N
Insert the pop-up body (Q) into the sink and screw the
(N) onto the pop-up body (Q). Ensure the pivot
hole is facing the back of the sink. Tighten the nut (P)
and remove the pivot nut (R).
9
N
Q
P
R
Insert the stopper (M) onto the sink. Remove the
preassembled horizontal rod (S) and clip (T) from the lift
rod strap (V). Install the horizontal rod (S) into the pop-
up body (Q) and through the hole of the stopper (M).
Install the pivot nut (R) onto the horizontal rod (S) and
hand-tighten it back onto the pop-up body (Q).
10
M
Q
R
S
8.
9.
10.