Installation manual

AQUAERO 5

After configuring alarm levels, alarm limits can be configured for various

sensors and corresponding alarm levels can be set.

Higher alarm levels are always processed with higher priority than lower

alarm levels. Depending on the severity of the malfunction, graduated alarm

actions can be configured. For example, the aquaero could be configured to

activate the integrated alarm buzzer when a temperature sensor reads more

than 40 °C, and to shut down the PC if the same sensor reads more than 50

°C using the relay output (optional accessories required).

10. Menu “Timer”

10. Menu “Timer”10. Menu “Timer”

10. Menu “Timer”

The aquaero 5 features a clock timer to perform various actions on

predefined times and days of the week. For timer actions, speed signal

output, alarm buzzer, relay, profile selection and USB keyboard commands

are available.

11. Menu “Infrared”

11. Menu “Infrared”11. Menu “Infrared”

11. Menu “Infrared”

The menu entry “Infrared” is used to configure the infrared receiver of the

aquaero 5. The three tiers of the aquaremote remote control (aquaero, PC

mouse, PC keyboard) can be individually activated or deactivated. For

default configuration, powering the PC up or down by remote control is

deactivated for safety reasons. The aquaremote has a red power button that

can be used for this function, the aquaero 5 can be trained to accept the

corresponding infrared command using the menu entry “Switch PC on/off via

infrared”.

Gelliehäuser Str. 1, 37130 Gleichen