Instructions / Assembly

Important! If your cold water connecon is 1/2” Please installed the included

3/8” to 1/2” stainless steel adapter onto the cold water valve and the faucet

connecon rst. Apply Teon tape where neccessary.

Cauon! open the faucet to the cold water side to test if the water is shut o.

If the water is not shut o, you may have shut o the hot water valve instead,

or your water valve is defecve. If your water valve is defecve, you will need

to shut the main water line o before proceeding with the installaon.

Step 2: Connect the water lter system

1. Shut off the cold water valve

2. Disconnect the existing cold water line from the cold water valve.

(Some water may leak, use a dry microber cloth to wipe off

excessive water.)

3. Disconnect the existing cold water line from the faucet connection.

4. Connect the inlet hose with the Female NPT connection to the Cold

Water Valve.

5. Connect the outlet hose with the Male NPT connection to the

Faucet connection.

6. Connect the quick connection side of the inlet hose to the system

head that shows in.

7. Connect the quick connection side out the outlet hose to the system

head that shows out.

8. Locate the system head in and out port

9. Connect the inlet hose with the female NPT side to the cold water

valve.

10. Connect the outlet hose with the male NPT side to the faucet

connection.

Inlet Hose

Fig. 1

Outlet Hose