Instructions / Assembly
Check the leaks and ush the lter
1. Slowly turn on the cold water valve to allow water to go through.
2. If water leakage occurs, turn off the water supply.
3. Wrap Teon tape if the leak is happening at a threaded source. Such
as the faucet hose connection or cold water valve connection. Or
check the connections on either side of the lter system and make
sure they are fully inserted.
4. Check again for leaks.
5. Turn on the faucet on the cold water side, and let the water run for 5
minutes to ush the lter before use.
SYSTEM STARTUP
Hot
Faucet hose
Cold
Fortitude Compact
System
6