Instructions / Assembly

Replacing the lter

1. Turn off the cold water valve supply and turn on the faucet to

release any remaining water pressure.

2. Hand rotate the lter to the right a quarter turn or until it stops.

Remove the lter from the system head.

3. Remove the protective cap from the new replacement lter.

4. Insert the new lter into the system head and hand rotate the lter

to the left a quarter turn or until it stops.

5. Turn on the cold water valve and turn on the faucet on the cold

water side to let it ush for 5 minutes before use.

Install Filter Remove Filter

SYSTEM MAINTENANCE