Installation Guide

AQUASURE AS-PR100E INSTALLATION ADDENDUM

Please follow the installation manual included with the system until reaching Step 5 of System installation on page 14. Do not

follow the Step 5 instruction as the system is no longer wall mountable and require a ﬂat surface area to place the system.

Follow the below instruction on connecting the pump to the system.

1. Mount the pump bracket to the

system with the provided nuts and

bolts.

2. Remove the stopper on both sides

of the pump.

3. Connect the WHITE color-coded

tubing from the system (W) to the

inlet of the pump (X)

4. Connect the WHITE color-coded

tubing from the connection (Y) in

between 1st stage AF-PR1 and

2nd Stage AF-PR2 to the outlet of

the pump (Z)

5. Connect the Male connector from

the system colored (Black / Blue)

to the female connector from the

pump colored (Black / Red).

6. Connect the Male connector from

the power supply colored (Black /

Red) to the female connector from

the pump colored (Black / Black).

7. Follow the STEP 6 of the Owners Manual on page 15 to

properly connect the system.

8. Follow the STEP 7 of the Owners Manual on page 16

from 1 to 3 and connect the power supply to the electrical

outlet nearby to turn on the pump.

9. Finish up the STEP 7 of the Owners Manual to complete

system installation.