Installation Guide

10
AQUASURE FORTITUDE PRO SERIES
STEP 7 (Continued...). Mounting the Valve Body onto the Media Tank
STEP 8. Connecting the Plumbing onto the Valve
In from main
water line
Out to
house
Out to
drain
4. Place the upper basket over the riser tube and
push the valve on the tank Thread the valve on
the tank by turning clockwise. Be sure not to
cross-thread the valve.
5. Tighten the vale hand tight, then snug it further
by tapping it with the palm of the hand. do not
use tools to tighten the valve or damage could
occur.
1. Follow the diagram and arrows on the valve to make sure the path of the water is
properly connected.
Note: If the water ow is reversed, damage to the system can occur.