Installation Guide

Tel: [phone]
3
AQUASUREUSA.com
I. Be Familiar with the System Before Installation
IMPORTANT! Please read the entire manual and become familiar with instructions and parts
needed before proceeding with the installation.
Inspect the System
Please take the system and all the components out of the box. Inspect the system and all the
connection ttings carefully, make sure nothing is damaged during shipping. If any part is cracked
or broken, please do not proceed with the installation and contact Aquasure or your distributor
for an exchange or diagnosis.
INSPECTION & PREPARATION
x 8 x 8 x 3 x 3 x 5 x 5
* 10” Pleated pleated sedemint lter is shown here. Pre-lter size may vary depending on the system conguraon
Pleated Sediment Pre-Filter
Parts:
• Aquasure High Flow Housing
• Aquasure Pleated Sediment Filter
• Aquasure Housing Wrench
• Aquasure Housing Mounting Bracket
• Mounting Bolts x 8
• Washers x 8
• Nipple 1” to 1” x 2
• Nipple 1” to 3/4” x 2
Pro Grade Mix Media Water Treatment System
Parts:
• Aquasure High Strength Fiberglass Tank
• Aquasure MFV Valve Head with 1” in/out
Ports and Media Reset Backwash Port
• Media (Prelled)
• Nipple 1” to 1” x 3
• Nipple 1” to 3/4” x 3
• Valve Head O-Ring
• In/Out Port O-Rings x 3
System components breakdown for Fortitude PRO Whole House Water Treatment System