Owner's Manual

6.1 Audio Menu
From the ‘Audio Menu’ you are able to change the bass, treble, balance, and fader.
Any changes made in the ‘Audio Menu’ are system wide so it will affect all modes.
1. To enter the ‘Audio Menu’ press the ‘AUDIO/MENU’ button.
2. In the ‘Audio Menu’ press the ‘AUDIO/MENU’ to scroll through all options.
3. To change the parameters use the rotary knob to adjust settings.
6.2. Clock Settings
From the clock settings menu you are able to adjust the time and switch the clock on or off.
1. To change the time press MENU then use the rotary knob to navigate to SYSTEM settings
then CLOCK SETTINGS. Use the rotary knob to adjust and set the time.
2. To switch the clock on or off press MENU then use the rotary knob to navigate to SYSTEM
settings then CLOCK PRIORITY. Use the rotary knob to select either ON or OFF.
6.3 Local/Distant Tuning
When ‘Local’ is turned on the Media Player seeks to only the radio channels with strong signal
strength. When ‘Local’ is turned off the Media Player will seek to all radio channels it receives signal
from.
When local is turned on the word ‘Local’ will appear in the upper right hand corner of the Media Player LCD.
1. When in AM/FM mode press FUNC to access the ‘Local/Distant Tuning’ settings.
2. Use the rotary knob to adjust settings.
6.4 Stereo/Mono
Change the output mode between stereo and mono. Some applications only accept a mono input.
1. When in AM/FM mode press FUNC to access the ‘Stereo/Mono’ settings.
2. Use the rotary knob to adjust settings.
17www.aquaticav.com/harley
Settings Operation Media Player AQ-MP-5UBT-HS