Installation Guide

Aquatic 3
Estate Series Owner's Manual & Installation Guide
Thank you for choosing an Aquatic bath. You have chosen one of the finest bath products in the industry! Aquatic
supports your purchase with strong commitments to quality and customer satisfaction.
Please read and follow all of the instructions contained in this Owner’s Manual before installing, operating or
maintaining your whirlpool. In addition, you should continually refer to these instructions during the life of your
whirlpool bath. Failure to comply with these instructions may invalidate your warranty. If you have any questions
concerning installation, operation, maintenance or any other aspect of your Bath, please contact:
AQUATIC CUSTOMER SERVICE CENTER: [phone]
(The Troubleshooting Guide on page 25 may be helpful in answering some of your questions.)
NOTE: The installation and service of your whirlpool
should be performed ONLY by a qualified electrician and plumber.
AQUATIC
Product Warranty Registration Information
8101 E. Kaiser Blvd., Suite 200 • Anaheim, CA 92808
(800) 945--2726 • Fax [phone]
www.aquaticbath.com
IMPORTANT!
To activate Product Warranty, please register with Aquatic.
Your product warranty must be registered and confirmed with Aquatic through
the Serial Number on your unit. To register, please contact Aquatic.
(800) 945--2726 • www.aquaticbath.com/register
This product MUST BE WATER-TESTED and inspected prior to installation
or warranty will be voided. See page 6 for instructions.
PLEASE CHECK ENTIRE UNIT FOR ANY DAMAGE.
If it appears damaged, contact your Aquatic Distributor immediately.
Aquatic warranty does not cover damage that occurs in transit.
IMPORTANT!