SERENITY DRIFTBATH™ OWNER’S MANUAL & INSTALLATION GUIDE Installer: This booklet must be given to the product owner. Please add important information below. Model # ___________________________________ Purchase Date ___________________________________ Serial # ___________________________________ Distributor ___________________________________ Note: Read all instructions before proceeding with installation. All specifications are ± 3/8’’ and are subject to change without notice.
Serenity DriftBath™ Owner's Manual & Installation Guide TABLE OF CONTENTS PRODUCT WARRANTY REGISTRATION INFORMATION IMPORTANT SAFETY INSTRUCTIONS 4–5 INSTALLATION INSTRUCTIONS Pre-Installation Instructions Structural Preparation Plumbing DriftBath with Chromatherapy LED Lights 6–7 8–9 9 10 OPERATION INSTRUCTIONS Bath-side On/Off Controls 11 DRIFTBATH USER INFORMATION 12 FCC CONSUMER INFORMATION 12 TUB CARE Maintenance Repair 13 13 WATER QUALITY Chemical & Water Quality 2 3 14 – 15 TROUBLE
Serenity DriftBath™ Owner's Manual & Installation Guide AQUATIC Product Warranty Registration Information Thank you for choosing an Aquatic bath. You have chosen one of the finest bath products in the industry. Aquatic supports your purchase with strong commitments to quality and customer satisfaction. IMPORTANT! To activate Product Warranty please register with Aquatic. Your product warranty must be registered and confirmed with Aquatic through the Serial Number on your unit.
Serenity DriftBath™ Owner's Manual & Installation Guide IMPORTANT SAFETY INSTRUCTIONS WARNING: When using this unit, basic precautions should always be followed, including the following: READ AND FOLLOW ALL INSTRUCTIONS: • WARNING: Risk of lethal electric shock. To reduce risk of electric shock, connect only to circuits protected by a Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Serenity DriftBath™ Owner's Manual & Installation Guide IMPORTANT SAFETY INSTRUCTIONS WARNING: WHEN USING THIS UNIT, THESE BASIC PRECAUTIONS SHOULD BE FOLLOWED. This manual contains information and instructions for proper operation and maintenance of your whirlpool. Failure to follow these instructions could result in personal injury, electrical shock or fire. READ AND FOLLOW ALL INSTRUCTIONS DANGER! TO REDUCE THE RISK OF INJURY: 1.
Serenity DriftBath™ Owner's Manual & Installation Guide INSTALLATION INSTRUCTIONS READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLATION PRE-INSTALLATION PROCEDURES PLEASE NOTE: THE MANUFACTURER ACCEPTS A +3/8” VARIANCE. THERE ARE VARIATIONS ON EACH TUB AND SPECIFICATIONS ARE SUBJECT TO CHANGE AS WE IMPROVE UPON OUR PRODUCT AS REQUIRED. THE DIMENSIONS NEEDED FOR SITE PREPARATION AND STRUCTURE BUILDINGS SHOULD BE MEASURED FROM THE TUB; AQUATIC ASSUMES NO RESPONSIBILITY FOR PREPARATORY WORK.
Serenity DriftBath™ Owner's Manual & Installation Guide QUIETNESS OF OPERATION: Aquatic has engineered their baths from base to lip to ensure quality, value, functional design, and maximum bathing comfort. However, installation is accountable for as much as 50% of a tub’s operating quietness. Please ensure the following: • The floor structure is adequate to support the installation. • For quieter operation and heat retention conservation, the walls surrounding the tub may be insulated.
Serenity DriftBath™ Owner's Manual & Installation Guide INSTALLATION INSTRUCTIONS STRUCTURAL PREPARATION Note: The bath should remain in its shipping carton until time of installation. 1. Literature dimensions are for reference only. Installation dimensions should be taken directly from the tub. An access panel of 16” x 16” minimum must be provided at the pump end of the tub allowing sufficient clearance to make final connections and for servicing the pump and power panel.
Serenity DriftBath™ Owner's Manual & Installation Guide INSTALLATION INSTRUCTIONS STRUCTURAL PREPARATION (CONTINUED) 6. Another installation option is that of a tile flange. Aquatic offers a factory installed tile flange for all rectangular and corner-unit tubs. 7. Install the bath unit per the instructions provided in this manual. CAUTION: THE TILE FLANGE DOES NOT SUPPORT THE TUB! A ledger board must be provided under the bath rim as indicated in the installation instructions.
Serenity DriftBath™ Owner's Manual & Installation Guide INSTALLATION INSTRUCTIONS DRIFTBATH WITH CHROMATHERAPY LED LIGHTS KEYPAD PUMP CONTROL BOX LIGHT CONTROL BOX UP/HAUT UP/HAUT B C W/D KEYPAD AUX OUTPUT INTPUT OUTPUT INTPUT W/D KEYPAD AUX NEMA PLUG PUMP LED LIGHTS NEMA PLUG MAIN BREAKER PANEL 120V-240V/60Hz NEMA PLUG IMPORTANT: 15A/120V DOUBLE POLE BREAKER WITH GROUND FAULT CIRCUIT INTERRUPTER CLASS "A". (TWO 15 AMPS/120 VOLTS CIRCUIT.
Serenity DriftBath™ Owner's Manual & Installation Guide OPERATION INSTRUCTIONS BATH-SIDE ON/OFF CONTROLS ON/OFF Pump ON/OFF LIGHT 1st Press: Light ON - WHITE 2nd Press: Light OFF Turn OFF and ON within 3 seconds the light will change to: SLOW - RAINBOW CYCLE; FAST - RAINBOW CYCLE; TURQUOISE; BLUE; MAGENTA; RED; ORANGE Electronic Keypad CAUTION: BEFORE USE OF THE PUMP, TEST THE GFCI FOR PROPER OPERATION. THE PUMP SHOULD TURN OFF WHEN THE GFCI “TEST” BUTTON IS PUSHED.
Serenity DriftBath™ Owner's Manual & Installation Guide DRIFTBATH USER INFORMATION PLEASE NOTE: No servicing of this product should be done by the user. There are no user serviceable parts. All controls are located in the control recesses on the lip of the tub. These are the only controls that should be used by the consumer. Do not change or alter any of these controls under any circumstances. Motors are self-lubricating -- No lubrication required.
Serenity DriftBath™ Owner's Manual & Installation Guide TUB CARE MAINTENANCE DriftBath Cleaning Before tub is used, remove all debris and clean tub. DO NOT USE ABRASIVE CLEANERS ON THE ACRYLIC FINISH. Use a non-abrasive detergent and rinse well after cleaning. • • • • Fill the tub with HOT water to a level 2” above the highest water port. Add 4-6 tablespoons of low-sudsing automatic dishwashing detergent and no more than 24-48 ounces of household bleach to the water. Operate tub for 10 minutes. Drain.
Serenity DriftBath™ Owner's Manual & Installation Guide WATER QUALITY CHEMICAL & WATER QUALITY Owners of fill and drain whirlpool bathtubs need to know basic information concerning water quality, how it affects the performance and enjoyment of the operation of their tubs, and steps that can be taken by the owner to correct related problems. Important issues are the microbiological and chemical quality of the water. 1.
Serenity DriftBath™ Owner's Manual & Installation Guide WATER QUALITY Iron - Iron is found in many natural waters especially from wells. Iron in water can also result from the corrosion of piping in the water supply system, such as cast iron mains or galvanized steel service lines, or galvanized piping in the home water system. High iron levels may result in the formation of brown stains in the vicinity of the faucet outlets of various fixtures in the home.
Serenity DriftBath™ Owner's Manual & Installation Guide TROUBLESHOOTING GUIDE WARNING: Always turn off power at the main electrical service panel when servicing your tub. SYMPTOMS POSSIBLE PROBLEMS SUGGESTED SOLUTIONS Motor does not start 1) GFCI or circuit breaker in OFF position. 1) Reset GFCI (if optional heater is installed, be sure there are two GFCI circuits.) 2) Contact your electrician. 3) Contact Aquatic. 4) Contact Aquatic. 5) Contact Aquatic. 6) Check and reconnect if needed.
Serenity DriftBath™ Owner's Manual & Installation Guide Aquatic Limited Warranty Serenity DriftBath™ Limited Warranty For Original Consumer For Household Usage WHAT PRODUCTS ARE COVERED Structures and surface finishes on the tub and their support systems including equipment, components, attachments and plumbing equipment. Different warranty periods apply to specific components.
AQUATIC Fax-On-Demand System: Toll Free (877) 618-7024 8101 E. Kaiser Blvd., Suite 200 • Anaheim, CA 92808 (800) 945-2726 • Fax (866) 544-5353 • www.aquaticbath.com 8MANDBTH | F.O.D. 9009 | 01.
