Specification

Customer Service: 800.945.2726 • aquaticbath.com
TECHNICAL SPECIFICATIONS
Note: Infinity 2 is not a drop in model. A deck must be built around the tub.
Pump
Fill Spout Location (not shown)
No alternate pump location available.
Blower
4 1/2"
B
A
18 1/2
”
60 1/2"
48 1/4"
50˚
30 3/4"
70"
26 1/4"
35 "
23 1/4"
26"
20 1/4"
Keypad
INFINITY 2
70 x 35 x 30
3
⁄4 inches
Not a drop-in model. Deck must be built around unit.
FEATURES Dimensional Tolerance ± 3⁄8”.Dimensions needed for site preparation should be measured from the unit.Aquatic assumes no responsibility for preparatory work.
Type and Model # Material Jets Pump Air System Blower Heater Controls Drain
Pkg. Wt.
lbs
Air-whirlpool #AI2INF7135A
Cast
Acrylic
16 102 GPM Injector Variable speed 1.5 kw Inline Electronic Universal 356
DIMENSIONS inches
Width
Overall / Net
Depth
Overall / Net
Height
Overall / Net
Skirt
Height
70 35 30
3
⁄4 –
SUMP DATA inches
Capacity to
Overflow
gal (ltr)
Min. Operating
Capacity
gal (ltr)
WIDTH @ centerline DEPTH @ centerline
Top Bottom Top Bottom
102 69 60
1
⁄2 48
1
⁄4 26 20
1
⁄4
ELECTRICAL DATA
Component Specification Requirement
Pump 9 AMP; 120 V
15 AMP 1 pole, separate circuit,
Class A GFCI
Inline Heater 1.5 kW; 12 AMP; 120 V
15 AMP 1 pole, separate circuit,
Class A GFCI
Blower 1.0 HP; 9.5 AMP; 120 V
15 AMP 1 pole, separate circuit,
Class A GFCI
This unit has a
3
⁄4” female waterfall fill spout connection.
Rev. 07.23.18
PLUMBING DIMENSIONS inches
A B
Drain
Diameter / Clearance
2
3
⁄8 9
1
⁄2 2 / 2
3
⁄4
NOTES:
1) Where applicable, utilize cut-out templates packed
with unit for deck cutouts.
2) 16 x 16 minimum access required at pump/blower location(s).