Instructions / Assembly

32 Aquatic
Serenity Owner's Manual & Installation Guide
BATHSIDE CONTROL SYSTEMS (FREESTANDING TUBS)
OPERATION
FREESTANDING MODELS
1: ON/OFF BLOWE
R
4: SPEED DECREASE
3: SPEED INCREASE
2: BLOWER CYCLES
REMOTE CONTROL
B
1: ON/OFF BLOWE
R
4: SPEED DECREASE
3: SPEED INCREASE
2: BLOWER CYCLES
KEYPAD
A
OR
KeyPad Functions LED
1: ON/OFF BLOWER
1st Press: The blower starts ON
2nd Press: The blower stops OFF
2: BLOWER CYCLES
1st Press: Wave Cycle - Speed goes gradually from maximum to minimum. ON
2nd Press: Pulse Cycle - Speed goes from minimum then straight back to maximum. BLINK
3rd Press: Returns to maximum speed OFF
3: SPEED INCREASE
1st Press: Press and hold to increase the blower speed,
release pressure at the desired speed.
When in cycles mode, increases the speed at which the cycle operates.
ON
(WHEN PRESSED)
4: SPEED DECREASE
1st Press: Press and hold to decrease the blower speed,
release pressure at the desired speed.
When in cycles mode, decreases the speed at which the cycle operates.
ON
(WHEN PRESSED)
Advanced Programming
INTEGRATED 20 MINUTE AUTOMATIC TIMER
Integrated 20 minute automatic timer on the system.
DRYING CYCLE
A 1 minute automatic drying cycle will start 20 minutes after the blower is turned off.
The blower LED button blinks while waiting for the purge cycle.