Full Product Manual

20 Aquatic
Builders’ Choice Air Owner's Manual & Installation Guide
The air bath action may cause even small amounts of bubble bath or shampoo to foam excessively. Exercise moderation
in experimenting with different soap products.
No servicing of this product should be done by the user. There are no user serviceable parts. All controls are located
in the control recesses on the lip of the tub. These are the only controls that should be used by the consumer. Do not
change or alter any of these controls under any circumstances.
Air blowers do not require lubrication.
AIR BATH USER INFORMATION
PLEASE NOTE:
FCC CONSUMER INFORMATION
ELECTRICAL INSTALLATION INFORMATION LISTED ON PAGE 12-13.
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict
accordance with the manufacturers instruction, may cause interference to radio and television reception. It has
been type tested and found to comply with the limits for a class B computing device in accordance with the
specifications in subpart J of part 15 of the FCC rules, which are designed to provide reasonable protection against
such interference in a residential installation. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference, which can be determined by turning the equipment
on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient the receiving antenna.
• Relocate the receiver with respect to the bath tub.
• Move the receiver away from the bath.
• Plug the receiver into a different outlet so that the receiver and bath are on different branch circuits.
• If necessary, the user should consult the distributor or an experienced radio/television technician for
additional suggestions.
• The user may find the following booklet prepared by the FCC helpful: “How To Identify and Resolve
Radio-TV Interference Problems.”It is available from the U.S. Government Printing Office, Washington, DC
20402, Stock No., 004-000-00345-4.