Full Product Manual

20 Aquatic
Millennium Owner's Manual & Installation Guide
Pressure Plus Jets
To adjust pressure (see Figure 4A):
1. Grasp the outer ring of the jet.
2. Turn the jet clockwise to increase flow, counter-clockwise to shut off.
To remove jet (see Figure 4B):
1. Grasp the outer ring of the jet.
2. Turn the jet counter-clockwise, until the jet clicks, then pull.
To replace or change jet (see Figure 4B):
1. Insert the jet into jet housing.
2. Turn the jet clockwise, past point of resistance, until the jet clicks.
Pressure-Flo Hydrotherapy Jets
For customized hydrotherapy, simply adjust volume of the Pressure-Flo Jet by turning
counter clockwise for a gentle flow of air and water or clockwise for stronger massage
action. Recessed for greater comfort, the Pressure-Flo Jet targets the hip and leg areas.
To adjust pressure (see Figure 5A):
1. Grasp the outer ring of the jet.
2. Turn the jet clockwise to increase flow, counter-clockwise to shut off.
To adjust direction (see Figure 5B):
1. Using fingertip, move jet eye to desired location.
To remove jet (see Figure 5C):
1. Grasp the outer ring of the jet.
2. Turn the jet counter-clockwise, until the jet clicks, then pull.
To replace or change jet (see Figure 5C):
1. Insert the jet into jet housing.
2. Turn the jet clockwise, past point of resistance, until the jet clicks.
Fan Jet
The Aquatic Fan Jet (see Figure 6) is deeply recessed for greater comfort during
bathing. It covers an 8" x 12" area of the body with oscillating streams of air and
water, like tiny hands, to massage tired and aching muscles. Operation of this jet
is automatic. The Fan Jet is a permanent jet fixture and should not be removed from
the tub, but cleaned with a bottle brush and warm, soapy water.
JET OPERATIONS (CONT.)
6
OPERATION
4A
4B
5A
5B
5C