Installation Sheet
18 Aquatic
All Infinity Series jets are removable and can simply be put into the dishwasher for cleaning. (Note: Use dishwasher
top rack and remove before the drying cycle starts.)
The Infinity Series features Aquatic’s exclusive Shiatsu Back Jetting System, Aquatic Rotary Massage Jets, Full
Size Pressure-Flo Hydrotherapy Jets, Rotary Massage Elite Jets and Pressure Plus Jets.
Note: Jets are located in the center of the Shiatsu
Back Jetting System on all Infinity models and stacked in a second lounger
on Infinity models 4-6. are located on both sides of the
Rotary Massage Elite Jets.
1. Grasp the outer ring of the jet.
2. Turn the jet clockwise to increase flow, counter-clockwise to
shut off.
1. Using your fingertip, move jet eye to desired location.
1. Grasp the outer ring of the jet.
2. Turn the jet counter-clockwise, until the jet clicks, then pull.
1. Insert the jet into jet housing.
2. Turn the jet clockwise, past point of resistance, until the jet clicks.
The unique Pulsating Neck Jet Pillow (see Diagram 8A) offers a comfortable
place to rest your head while enjoying the luxury of a soothing neck massage
The Pulsating Neck Jet is pressure adjustable by simply turning the jet. The
Neck Jet can be removed and placed in the dishwasher for easy cleaning.
(See Maintenance and Care, page 22.)
1. To Remove: Grasp the pillow from the top and pull out and down.
2. To Replace: Line up loop tape on pillow with loop tape on the tub and
press firmly.