Owner's Manual

ManualsBrandsAquatic ManualsCar Audio & VideoAQ-MP-5UBT-HS

Table Of Contents

USER / INSTALLATION MANUAL

PLEASE READ THIS INSTRUCTION MANUAL BEFORE

INSTALLATION AND OPERATION

AQ-MP-5UBT-HS - WATERPROOF MEDIA PLAYER

for SiriusXM, iPhone, iPod, USB, Bluetooth & MP3 devices

Replaces Factory Radio on Harley-Davidson

Motorcycles

(Models 1998-2013)

Summary of content (23 pages)

PAGE 1
AQ-MP-5UBT-HS - WATERPROOF MEDIA PLAYER for SiriusXM, iPhone, iPod, USB, Bluetooth & MP3 devices USER / INSTALLATION MANUAL Replaces Factory Radio on Harley-Davidson® Motorcycles (Models 1998-2013) PLEASE READ THIS INSTRUCTION MANUAL BEFORE INSTALLATION AND OPERATION
PAGE 2
Table of Contents Media Player AQ-MP-5UBT-HS 1 Getting Started......................................................................................................................... 4 1.1 Contents............................................................................................................................. 4 1.2 Connections........................................................................................................................ 4 1.3 Wiring Diagram............................
PAGE 3
Table of Contents Media Player AQ-MP-5UBT-HS 6 Settings Menu........................................................................................................................... 17 6.1 Audio Menu......................................................................................................................... 17 6.2 Clock Settings..................................................................................................................... 17 6.3 Local/Distant Tuning.....................
PAGE 4
Getting Started Media Player AQ-MP-5UBT-HS 1.1 Contents • • • • • AQ-MP-5UBT-HS Digital Media Player Dummy Faceplate/Dust Cover AQ-USB-1 USB Input Socket Four-pin Speaker Wiring Harness User / Installation Manual 1.2 Connections (see also ‘1.3 Wiring Diagram’) 1. 23-pin Harley-Davidson® Standard Harness Connection The 23-pin harness supplies power and ground connections to the Media Player and two speaker channel output connections from the Media Player. 2.
PAGE 5
Getting Started Media Player AQ-MP-5UBT-HS 1.
PAGE 6
Getting Started Media Player AQ-MP-5UBT-HS 1.4. Mounting Precautions Please observe the following precautions: 1. Install the unit where it does not interfere with driving. 2. Check clearances on both sides of a planned installation before drilling any holes or installing any screws. 3. When routing RCA cables, keep them away from power cables and speaker wires. A common source of noise in the audio system is the motorcycle ignition system.
PAGE 7
Getting Started Media Player AQ-MP-5UBT-HS 1.6 Installing the Media Player if an existing factory stereo is already installed If replacing an existing Harley-Davidson® factory stereo use the existing Harley-Davidson® factory side mounting brackets and hardware to mount the Media Player. 1. Unplug the 23-pin harness and FM/AM radio antenna from the factory stereo. 2. Remove the factory stereo and replace with the AQ-MP-5BT-HS Media Player using the existing factory mounting hardware. 3.
PAGE 8
Getting Started Media Player AQ-MP-5UBT-HS 1.8 Handle Bar Controls Audio switch (left hand side) Mode switch (right hand side) The AQ-MP-5UBT-HS is a plug and play solution for 1998-2013 Harley-Davidson® Motorcycles. Plug the standard Harley-Davidson® 23-pin connector in to the back of the AQ-MP-5UBT-HS and your speakers and hand controls will work the same as the standard factory install (some HarleyDavidson® models may require additional steps). Some stock Harley-Davidson® features e.g.
PAGE 9
Location of Controls Media Player AQ-MP-5UBT-HS 2.1 Media Player Controls 1 2 11 3 10 4 9 12 3 5 8 1. Front face release 4. Mode button 2. Preset/Search 5. Band/2-Zone 3. Fast Rewind/Forward 6. LCD screen www.aquaticav.com/harley 6 7 7. Menu/Info 10. ESC/Dimmer 8. Function/XBS 11. 12V Triggers 9. Play/Pause/Subwoofer 12.
PAGE 10
Location of Controls Media Player AQ-MP-5UBT-HS 2.
PAGE 11
Listening to Devices Media Player AQ-MP-5UBT-HS 3.1 Listening via Bluetooth The Bluetooth menu is accessible via the in the ‘Menu/Info’ button and is used to connect or disconnect a Bluetooth device that has already been paired. IAP (Information Apple Protocol) Bluetooth connectivity allows device information, such as song, playlist and album titles, to be streamed wirelessly and viewable on the AQ-MP-5UBTHS screen. This feature is available for Apple devices only. 3.1.1 Pair with Bluetooth Device 1.
PAGE 12
Listening to Devices Media Player AQ-MP-5UBT-HS 3.2.2 Listening via USB Flash Drives 1. Remove the faceplate and press the lever in the lower right corner of the unit to release the mechanism. 2. Plug the USB drive in the USB port. 3. Replace the faceplate. If the stereo was previously on it will come back on. If not press the Rotary knob to power it on. 4. Press the Mode button and select USB Mode. 3.2.3 USB Search 1. When using an iPhone, iPod or USB ﬂash drive press SEARCH to enter USB searching mode.
PAGE 13
Listening to SiriusXM® Satellite Radio Media Player AQ-MP-5UBT-HS 4.1 What is SiriusXM Satellite Radio? Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM-Connect Vehicle Tuner and subscription are required. For more information,visit www.siriusxm.com 4.
PAGE 14
Listening to SiriusXM® Satellite Radio Media Player AQ-MP-5UBT-HS 4.4 Tuning to Channel Presets 1. Press BAND to select the SXM1, SXM2 or SXM3. 2. Press PRESET then use the encoder and rotate to the desired station. 4.5 Removing Channel Presets 1. Press BAND to select the SXM1, SXM2 or SXM3. 2. Press FUNC, then select ‘Remove Preset’. 3. Select the desired preset to be removed. 4.6 REPLAY Playback • Play/Pause: Using the Play/Pause button will allow the user to Play/Pause live audio.
PAGE 15
Listening to SiriusXM® Satellite Radio Media Player AQ-MP-5UBT-HS 4.9 Direct Tune Press FUNC then select ‘Direct Tune’, using the encoder. Rotate to select each number you would like to access (e.g. for channel 101; rotate ﬁrst digit to 1 then press Enter, rotate second digit to 0 then press Enter, rotate last digit to 1 and press Enter. Channel 101 is now selected). 4.10 Channel Tune Tuning to a speciﬁc channel can be done in three ways: 1.
PAGE 16
Listening to FM/AM Radio Media Player AQ-MP-5UBT-HS 5.1 Enter FM/AM Radio Mode 1. Press MODE on the unit keypad and select RADIO mode. 5.2 Scan or Navigate FM/AM Radio Channels 1. Press FAST REWIND/FAST FORWARD to seek another station. 2. Press and hold either FAST REWIND/FAST FORWARD for manual tuning back or forward. 5.3 Saving Radio Channel to Memory 1. Tune to the station you would like to be saved as a preset. 2. Press the FUNC button to enter the Function menu. 3. Select ‘Manually Save Preset’. 4.
PAGE 17
Settings Operation Media Player AQ-MP-5UBT-HS 6.1 Audio Menu From the ‘Audio Menu’ you are able to change the bass, treble, balance, and fader. 1. To enter the ‘Audio Menu’ press the ‘AUDIO/MENU’ button. 2. In the ‘Audio Menu’ press the ‘AUDIO/MENU’ to scroll through all options. 3. To change the parameters use the rotary knob to adjust settings. Any changes made in the ‘Audio Menu’ are system wide so it will affect all modes. 6.2.
PAGE 18
Settings Operation Media Player AQ-MP-5UBT-HS 6.5 FM Tuning Area The FM tuning can be set to different areas, using the rotary knob to scroll through to select the desired tuning area. There are seven different tuning areas: USA, EUR, LAT, ASIA, MIDDLE EAST, AUSTRALIA, RUSSIA. 1. When in AM/FM mode press FUNC to access the ‘FM Tuning Area’ settings. 2. Use the rotary knob to adjust settings. 6.6 Beep Tone Beep tone plays when any button is pressed, it can be toggled on and off from this selection. 6.
PAGE 19
Additional Features Media Player AQ-MP-5UBT-HS 7.1 External 12V Triggers Aquatic AV understands the need for more ﬂexible remote applications. With the AQ-MP-5UBTHS Media Player Aquatic AV has provided two independent 12V ‘accessory’ trigger, activated from the RF wireless remote. These could activate any 12V based device such as LED lighting. In any operational mode, press the (12V TRIGGER) key to activate. Press again to deactivate.
PAGE 20
Speciﬁcations & Dimensions Media Player AQ-MP-5UBT-HS 8.1 Speciﬁcations Media Supported media....................................Bluetooth (A2DP & iAP) / USB / MP3 / FM/AM / SiriusXM Supported media max. dimensions...........107 x 184mm (WxH) Device charging......................................via USB Inputs Auxiliary................................................ 1x 3.5mm stereo Jack socket, 1x stereo pair RCA USB......................................................
PAGE 21
Warranty Information Media Player AQ-MP-5UBT-HS Aquatic AV offers a limited warranty of our products on the following terms: Length of warranty 2 years on audio systems, electronics, speakers, and accessories (receipt required). Coverage This warranty covers only the original purchaser of an Aquatic AV product purchased from an authorized Aquatic AV dealer.
PAGE 22
FCC Statement Media Player AQ-MP-5UBT-HS FCC ID: MADE IN CHINA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 23
Aquatic AV 282 Kinney Drive San Jose, CA 95112, USA E-mail: info@aquaticav.com US & Canada: 1 877 579 2782 International: +1 408 559 1668 Fax: +1 408 559 0125 www.aquaticav.