User's Manual

Table Of Contents

Remove the Water/Dust Proof RF Wireless Remote control from the Digital Media

Locker . place the Unscrew the waterproof cap on the back of the remote control.

CR-2430 battery in the RF Remote control and replace the water/dust proof cap.

The remote control uses state-of-the-art technology and will inform you if the dock is

receiving the command from the remote control. In any case, if the LCD display "NO LINK"

this means that your Locker is off or remote control is out of reception range.

GETTING STARTED

To activate the Digital Media Locker , press the on/off button, standby mode will be

indicated by a red LED. ON mode will be indicated by a blue LED.

When the unit is in the standby position the red LED will be lit

If you loose your remote control and buy another new remote control, please follow

the above to start pairing before normal usage.

Each Digital Media Locker comes with a matching RF (Radio Frequency) Wireless

LCD Remote control. This remote is required use any functions on the unit.For any

additional remote controls, you will need to activate/Synchronize those remote controls

to the S1 by following the steps above.

REMOTE BATTERY INSTALL

REMOTE SYNCHRONIZING

POWER ON

Press and hold MODE button on the remote. Then it will show “pair”. Keep pressing

this key. Then press the power button of the locker from off(no light) to standby (red light)

If the pairing is successful it will show “welcome”. LED will turn blue. If pair is not successful.

Please repeat the step above.

to pair with the locker.

MODEL: AQ-DM-4UBT

FILE NAME: IB-DM-4UBT_manual_103012