Typical Aquatica® Freestanding Bathtub Installation & Care Manual USA and CANADA www.aquaticaplumbing.com E: info@aquaticaplumbing.
TypicalAquatica Freestanding Bathtub ® INSTALLATION PROCEDURE Before you start: • Ensure that the floor is even. • The wate-overflow fitting is supplied with the product, however other accessories like the slip joint and adaptors are not included and must be purchased seaparately. • Because of the technical features of the product, it should be used only with the supplied waste-overflow or specific 3rd party models that have been tested and approved by us. fig.
TypicalAquatica Freestanding Bathtub ® INSTALLATION SEQUENCE continued 4 5 6 3” ABS DWV Hub x FIPT Female Adapter* • Picture 4: the water outlet pipe should be connected. • Picture 5: foot leveling lock nuts are adjusted. 7 • Picture 6: silicone is applied to the feet of the bathtub that stands on the floor. • Picture 7: when the installation is completed, the bathtub is taken down from the supports ( ie 2 x 4x4's).
Typical Aquatica® Freestanding Bathtub - Maintenance Instructions Typical Aquatica® Freestanding Bathtub - Инструкция по уходу Hooldus juhend Typical Aquatica® Freestanding Bathtub - Installation & Entretien Typical Aquatica® Freestanding Bathtub - Manuale per il corretto mantenimento Typical Aquatica® Freestanding Bathtub - Instrucciones para la correcta manutención PAA Ltd., Unijas street 12A, Riga, Latvia 13 EN 14516 CL1 CA-DA PAA-BT-SILKS-19/2013 max.