Use and Care Manual

Cleaning &
Maintenance
AQUASTONE™ BATHTUBS
Warnings
Detergents that contain alcohol, strong acids and acetones must not be used to treat
the AquaStone™ surfaces.
If one of the above mentioned substances come into contact with the material, we recommend cleaning
the surface immediately with plenty of water and detergent to avoid the formation of permanent stains.
Ensure not to use colored detergents which could leave pigment residues.
Avoid contact between the material and products with high coloring power such as nail varnish, hair dyes,
self-tanning products, etc., and oil-based products (hair oil and conditioner), because they could cause
permanent stains.
Do not use cloths or pads containing metal wire.
Recommended products
Soft cotton cloths of a “natural multi-purpose” type
• Abrasive sponges like “Scotch-Brite©” (depicted overleaf) or similar.
• Ammonia-based detergents1 (e.g. LYSOFORM)
• Slightly abrasive cream-based detergents (e.g. CIF, Mr. Clean, Fantastik, etc.)
• Descaling agents (e.g. VIAKAL)
• Bleach
www.aquaticaplumbing.com
E: [e-mail]
15.0” (174A)
16.375” (174B)
1
2
min
0.393”
min
0.393”
!
24 h
!
4a 4b
3 USA & CANADA INSTALL
HANDLE
WITH CARE
DO NOT
DROP
3 in. ABS DWV Hub
x FIPT Female Adapter
The ABS female adapter features a hub x female NPT thread connection
and provides a means for adapting a solvent weld connection to a threaded connection
15.0” (174A)
16.375” (174B)