Specification
1
1. PRODUCT NAME
AquaTight Stain Guard Grout Additive
2. MANUFACTURER
H2O Barrier Technologies LLC
3605 Sandy Plain Road
Marietta GA 30066, USA
1-877-561-4262 Office
1-678-609-6787 Fax
h2obtech.com
3. PRODUCT DESCRIPTION
AquaTight Stain Guard Grout Additive is a premium grout
admixture for adding stain resistance to cement-based grouts
including all Sanded and Unsanded Grouts.
Features and Benefits
• Eliminates the need to seal the grout
• Protects grout from stains, mold and mildew
• Enhances grout color
• Indoor/outdoor use
• Easy use and cleanup
• Freeze/thaw stable
Uses
As an admix for cement-based grouts including all
Sanded and Unsanded grout to increase stain, mold and mildew
resistance.
SAFETY
READ THE SAFETY DATA SHEET (SDS) BEFORE USING THIS
PRODUCT. SDS Sheets are available on our website h2obtech.com
or contact Medical Emergency Phone Number (24 Hours):
1-888-853-1758, Transport Emergency Phone Number
(CHEMTREC): 1-800-424-9300 or contact AquaTight Technical
Services at 1-877-561-4262 (7:00AM to 5:00PM M-F, Central
US Time).
CAUTIONS
Read complete cautionary information printed on product
container prior to use. For medical emergency information, call
1-877-561-4262.
This Product Data Sheet has been prepared in good faith on
the basis of information available at the time of publication. It is
intended to provide users with information about and guidelines
for the proper use and application of the covered AquaTight
brand
product(s) under normal environmental and working conditions.
Because each project is different, H2O Barrier Technolgies
Products Inc. cannot be responsible for the consequences of
variations in such conditions, or for unforeseen conditions.
Data Sheets are subject to change without notice. For the latest revision, check our website at h2obtech.com
4. TECHNICAL DATA
VOC
<14 g/l
Packaging
72 fl oz (2.1 L) bottles, 4 per case - Product #65510031
Shelf Life
24 months from the date of manufacture when stored in the
original, unopened container, away from moisture, under cool,
dry conditions and out of direct sunlight.
Job Mockups
The manufacturer requires that when its AquaTight products are
used in any application or as part of any system that includes
other manufacturers’ products, the contractor and/or design
professional shall test all the system components collectively
for compatibility, performance and long-term intended use in
accordance with pertinent and accepted industry standards
prior to any construction. Written documentation of the tests
performed shall be satisfactory to the design professional and
contractor. Test results must include the means and methods
of application, products used, project-specific conditions being
addressed, and standardized tests performed for each proposed
system or variation.
Mixing
When using 25 lb bags (11.3 kg) of All Types of Sanded Grout:
1. Use in place of water for mixing grout.
2. Pour one full 72 fl oz (2.1 L) bottle of AquaTight Stain
Guard Grout Additive into a clean, dry, five gallon pail. Add
powder and mix to a stiff, lump free consistency. If using
a mechanical mixer, do not exceed 150 rpm and avoid
whipping air into the mixture.
3. If additional liquid is required to achieve the desired
consistency, up to a maximum of 2 fl oz (59 mL) of water may
be used.
When using 10 lb bags (4.5 kg) of All Types of Sanded Grout:
1. Use in place of water for mixing grout.
2. Pour 29 fl oz (.8 L) of AquaTight Stain Guard Additive
(approximately 40% of the bottle) into a clean, dry, five gallon
pail, add powder and mix to a stiff, lump free consistency. If
using a mechanical mixer, do not exceed 150 rpm and avoid
whipping air into the mixture.
3. If additional liquid is required to achieve the desired
consistency, up to a maximum of 2 fl oz (59 mL) of AquaTight
Stain Guard Additive may be used.
4. Let stand for 10 minutes to give all ingredients time to slake.
Remix and use.
5. Do not add more liquid or dry grout to the mix after slaking.
aquajIGHX
AquaTight StainGuard
Grout Additive