Owner's manual

Operating Instructions and Parts List AR390
6
www.arblueclean.com
7. The safety trigger lock should
be locked at all times when
pressure washer is not in use.
8. Plug the power cord into a
grounded 120V outlet and press
the reset button as shown.
9. THIS MUST BE DONE EACH
TIME THE UNIT IS PLUGGED IN
AN OUTLET.
10. To unlock gun trigger push tab
down.
11. Pull trigger then turn on power
switch located on back of pres-
sure washer.
2. Insert lance into the gun by
turning clockwise at the same
time.
3. Turn counterclockwise to re-
move.
4. Remove shipping cap from
front of pressure washer.
5. Attach garden hose adapter
with the pump end of garden
hose. Attach with quick con-
nect to front of washer.
6. Squeeze trigger to make sure
the trigger does not move.
oPeratinG inStrUctionS (cont)
Pump
Hose
Garden Hose Adapter
Reset
Trigger
Gun Safety
Tab
0 (off)
I (on)