Full Product Manual
11
OPERATING INSTRUCTIONS
• Push the power button to turn the unit on (green
power light will turn on). The unit will turn on for 1 - 2
seconds and shut off. This is a normal function of the
auto start feature.
• Squeeze the spray gun trigger to begin pressure wash-
ing.
• Begin power washing by squeezing the trigger on the
spray gun all the way into the handle.
• Release the spray gun trigger to stop the power
washer.
• Allow the motor to come to a complete stop before
squeezing the trigger again.
• Squeezing rapidly will cause the auto start feature to
miss an on/off cycle that may prevent it from turning
on while squeezing trigger after rapid squeezing. Use
slow, deliberate trigger pulls to avoid this.
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
• Turn on water supply at the faucet to completely open.
• Make sure the power switch is off (light will be off).
• Unwind the power cord completely and plug
into a grounded 120 volt outlet.
• Turn the safety lock button on the spray gun to
unlocked. While pointing the spray gun in a safe
direction, squeeze the trigger on the spray gun until
there is a steady stream of water, letting the water and
air out of the hose.
OFF ON
K
lock
93982_MP_AR 2IN1.indd 11 16/12/19 下午4:17