Instruction Manual Model AR383SS OFF/O ON/I 383SS Customer Help Line 1-866-235-5112 WARNING: To reduce the risk of injury, the user must read and understand the instructions before using this product. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE AR383SS-92731-DR www.arblueclean.
Q uick S tart G uide Package Content: 1. Power washer unit 2. Manual 3. Nozzle cleaning wire (may be 3 taped to the manual) 4. 5. 6. 7. 8. 9. High pressure hose Spray gun holder Nozzle tray Screws (1 for nozzle tray) Rotary nozzle Quick connect nozzles (0°, 25°, Hose Reel For Storage Only 1 5 2 7 9 4 OFF/O 0° - Red 8 ON/I 25° - Green Soap) 10. Lance 11. Spray gun (11A shows trigger lock button) Soap - Black 383SS 6 10 12. Garden Hose Adapter (Connect 11 to Garden Hose) 12 11A 1.
8. Connect lances to spray gun, insert lance into spray gun, push together and at the same time twist clockwise to lock in place. Removing push together and twist counterclockwise then pull apart. Trigger Lock Trigger Unlock 7. Press front button in to lock the trigger. Press back button to unlock trigger. 9. Attach nozzle to lance by pushing into place. 10. Remove nozzle by pulling collar back on lance and pulling out nozzle. 11. Fill detergent tank.
T able of C ontents Quick Start........................................................ 2 How to Clean.................................................. 14 Specifications................................................... 4 Operating Tips and Maintenance................... 14 Limited Warranty.............................................. 4 Storage........................................................... 16 Warranty Process............................................. 4 Pump Saver................
Introduction Congratulations on the purchase of your BLUE CLEAN POWER WASHER! Your BLUE CLEAN POWER WASHER is a power tool in every sense of the word that may be used outside your house and in. It is one of the finest most powerful home-use power washers in the marketplace today. Please familiarize yourself with the following assembly, operating and safety information. Read this manual before using the power washer. Failure to follow these instructions could cause personal injury, property damage, or both.
• When you press the power switch to turn off the power washer, water pressure may remain in the system. To discharge the pressure, point the spray gun in a safe direction and pull the trigger. • • Never spray flammable liquids. • • Never use the power washer in areas that contain combustible dust, liquids or vapors. • • • • • • • • • 6 Avoid contact of the pressure hose with sharp objects and examine the hose regularly. Replace if damaged.
Package Content: 1. Power washer unit 2. Manual 3. Nozzle cleaning wire (may be taped to the manual) 4. High pressure hose 5. Spray gun holder 6. Nozzle tray 7. Screws (1 for nozzle tray) 8. Rotary nozzle 9. Quick connect nozzles (0°, 25°, Soap) 10. Lance 11. Spray gun (11A shows trigger lock button) 12.
Unpacking & Assembly • After unpacking the BLUE CLEAN POWER WASHER, lay out parts and accessories. Familiarize yourself with the parts in the package by comparing them to those listed on the “PACKAGE CONTENTS” page. • The BLUE CLEAN POWER WASHER requires some minor assembly. You’ll need a Phillips screwdriver to install the high pressure hose hook and the nozzle tray. NOTE: Some parts may or may not be already assembled. • High pressure hose is stored on the hose reel.
High Pressure Hose • Screw the high pressure hose (clockwise) on the left of the unit at the bottom (Fig. 4). Pull back the collar and insert o-ring post into the water outlet far enough so the collar can thread onto the outlet threads until hand tight. Do not use pliers or vice grips to tighten. If it takes fewer than six or so turns you have not properly tightened the high pressure hose fitting. It is easier to position the power washer in front of you so to ensure that the threads are started correctly.
Spray Gun • To lock the trigger of the spray gun pointing the gun away from you and push the lock button front to lock, (Fig. 7), after doing so, squeeze or pull the trigger to make sure it is locked and will not move. Always leave lock button in lock position when not in use. This ensures the gun is in “safe” mode until it is ready for use. Trigger Lock Trigger Unlock Fig. 7 Fig.
Always test a small area to avoid chance of damaging the surface. (Fig. 11) Fig. 11 IMPORTANT NOTE: When applying detergent use the soap nozzle. • When using the detergent, fill it with a properly formulated detergent or cleaner with water ratio according to instructions on the container (Fig. 12). The detergent tank comes with a straw which is fitted into the screw-on top. If you don’t see the straw, look inside the tank and attach it to the screw-on top (Fig. 13). Fig. 12 • Fig.
Garden Hose Adapter • Attach the “silver” collar directly to the power washer water inlet and hand tighten. (Fig. 14) • Remove washer filter, then using an 8mm or 5/16 allen wrench, tighten until snug. DO NOT over tighten. (Fig. 15) Fig. 14 • Replace the washer filter and attach garden hose to the blue collar. (Fig. 16 & 17) Fig. 16 • 12 Fig. 15 Fig. 17 You have now completed the assembly of your BLUE CLEAN POWER WASHER and are now ready to begin using your electric power washer.
Operating Instructions *!Turn on the water supply at the faucet.!* (Fig. 18) OFF/0 ON/I Fig. 18 OFF/0 ON/I Fig. 19 Powering Up • Make sure the “ON/OFF” switch is in the “OFF” position. The power switch has international symbols for ‘on’ and ‘off’: On (|) Off (O), (Fig. 19). • Unwind the power cord completely and plug the GFCI into a grounded 120 volt outlet. Press the ‘reset’ button on the GFCI box (Fig. 20). The indicator window should show a red color.
How To Clean Cleaning nozzles • A clogged or partially clogged nozzle can cause significant reduction of water pressure coming out of the nozzle and/or cause the unit to pulsate while spraying. • Turn off the unit • Turn off the water supply to the unit • Relieve any pressure trapped in the hose by squeezing the trigger 2-3 times, and then lock the spray gun by pushing the lock button from left to right. • The screens inside the adapter should be cleaned periodically.
• Never use a narrow high pressure stream of water or the turbo lance on soft surfaces susceptible to damage. • Use the 25° angle quick connect nozzle when cleaning windows. Be sure to place the nozzle approximately four to five feet away from the window with the nozzle at forty five degree angle. Squeeze the trigger and vary the spray pattern and angle until optimum cleaning efficiency is achieved. Detergent Injector/Storage • Use detergents designed for power washers.
Storage • Remove lance from the gun and place in the accessory holder. Place the gun in the accessory holder one the side. Lances are placed into any of the slots in the back of the unit. Make sure to discard any remaining detergent from the tank. Flush the tank and nozzle head with fresh water to prevent clogging. • When your pressure washing session has been completed, turn off the power switch located on the front of the power washer. Unplug the power cord from the outlet. Turn off the water supply.
Pump Saver Pump Saver is a product that protects and prolongs the life of the pump. This will keep the internal parts of the pump lubricated and protected from freezing while being stored in ALL climates. It also assists with protection from internal corrosion. The Blue Clean part # is: PW64511 (16oz. bottle). Order online at www.arblueclean.com Pump Saver Instructions Follow the previous storage instructions for your power washer.
Replacement Parts 2 1 10 4 5 0° - Red 6 25° - Green 7 Soap - Black 9 3 8 Pos. Description Part Number Qty.
T roubleshooting Unit will not turn on. and FAQ s Make sure the power washer is in the “OFF” position. Plug in the electrical cord to a grounded 120 volt outlet (no electrical extension cord should be used). If the electrical cord will not plug into your outlet, your electrical outlet is not properly grounded and should not be used. Use another electrical outlet. Press the reset button on GFCI power box. If the color of red is not visible in the little window on the GFCI, unplug and plug in again.
Model AR383SS OFF/O ON/I 383SS Cleaning and troubleshooting tips, manuals and other helpful information are available on our website. For parts and accessories for your Blue Clean Washer, visit www.arblueclean.com. Ordering is easy and all major credit cards are accepted. A.R. NORTH AMERICA, INC. Attn: Power Washer Warranty Department 140 - 81st. Avenue NE, Fridley, MN 55432 Phone: 1-866-235-5112 Fax: 1-866-331-2762 Email: info@arblueclean.com Website: www.arblueclean.com www.arblueclean.