Use and Care Manual

10
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OFF/0
ON/I
OFF/0
ON/I
When using the detergent, ll it with a
properly formulated detergent or cleaner with
water ratio according to instructions on the
container.
DO NOT use thick gel-like detergents, as they
will clog the power washer and can cause
damage.
Turn the power switch to the “ON” (|) position. The
unit will turn on for 1 - 2 seconds and shut off. This is
a normal function of the auto start feature. Squeeze
the spray gun trigger to begin pressure washing.
Begin power washing by squeezing the trigger on the
spray gun all the way into the handle.
Release the spray gun trigger to stop the power
washer
Allow the motor to come to a complete stop before
squeezing the trigger again.
Squeezing rapidly will cause the auto start feature to
miss an on/off cycle that may prevent it from turning
on while squeezing trigger after rapid squeezing. Use
slow deliberate trigger pulls to avoid such symptoms.
Always test a small area to avoid chance of
damaging the surface.
When removing the detergent tank remove lid
and place nger in tank lifting up while pulling
tank out.