User's Guide

Arad Technologies Ltd. | st. HaMada, Yokneam Elite , 2069206, Israel | www.arad.co.il

4 Encoder module configuration

There are possible to configure Encoder module for operation from GUI.

4.1 Configuration set shall be stored into Sonata meter by press on button.

4.2 Sonata shall configure communication to Encoder module by RTC Alarm configuration

according to GUI parameters:

4.2.1 In case of user select Sonata RTC Alarm

shall be configured for time is defined in “Minutes” field. Communication to Encoder

module shall be performed every “Minutes” field time.

4.2.2 In case of user select

Sonata RTC Alarm shall be configured for time is defined in “First” or “Second” field,

according to selected option. Communication to Encoder module shall be performed at

selected time.

4.3 Encoder module shall support only backward variable format.

4.4 Counter type:

4.4.1 Net Unsigned (1 is converted to 99999999).

4.4.2 Forward (default).

4.5 Resolution:

4.5.1 0.0001, 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 (default value 1).