Installation manual

BUILDING CONTROL CONSENT CHECKLIST
Hearths, Fireplaces, Flues and chimneys
This checklist is to ensure heaths, fireplaces, flues and chimneys are satisfactory, and show what you have done to comply with
the requirements of the Building Regulations 2000 approved Document J 2002
1. Building address where work has been carried out ……………………………………………………………………………....
………………………………………………………………………………………………………………………….
2. Identification of hearth, fireplace chimney or flue
3. Firing capability: solid fuel / gas /.
4. Intended type of appliance.
State model and output.
5. Ventilation provision for the appliance:
State type and area of permanently open vents.
I/We the undersigned confirm that the above details are correct. In my opinion, these works comply with the
relevant requirements in part J of Schedule 1 of the Building regulations.
Print name and title…………………………………………………………………..Profession…………………………………..
Capacity……………………………………………………………………………...Telephone No. ……………………………..
Address………………………………………………………………………………………………..Postcode…………………..
Signed………………………………………………………………………………..Date………………………………………...
Registered member of..(e.g. CORGI, OFTEC, HETAS, NACE, NACS)………………………………………………………….
7. Hearth. Form of construction, new or existing?
8. Inspection and testing after completion
Test carried out by:
Test and results
Flue Visual
Inspection Sweeping
Coring ball
Smoke
Appliance (where included) spillage
6. Chimney or flue construction
a, State the type or make and whether new or existing
b, Internal flue size (and equivalent height, where calculated
natural draught gas appliances only)
c, If clay or concrete flue liners used confirm that they are
correctly jointed with socket end uppermost and
state jointing materials used.
d, If an existing chimney has been refurbished with a new
Liner, Type and make of liner fitted.
e, Details of flue outlet terminal and diagram reference.
Outlet Details: / Complies with:
f, Number and angle of bends
g, Provision for cleaning and recommended frequency.
18
Villager Esprit Stove
INSTALLATION