WAVE 2 AC WIRELESS ACCESS POINT Quick Start Guide AN-510-AP-I-AC AN-810-AP-I-AC
Araknis Networks Wireless Access Point Quick Start Guide Federal Communication Commission Interference Statement Industry Canada Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Araknis Networks Wireless Access Point Quick Start Guide Araknis Networks Wireless Access Point Quick Start Guide Industry Canada Statement, Continued CE Statement Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment.
Araknis Networks Wireless Access Point Quick Start Guide Welcome to Araknis Networks™ Step 1: Unbox Thank you for choosing an Araknis™ WAVE 2 AC Wireless Access Point (WAP). With newly designed circular housing, an ingeniously easy new mounting system, convenient PoE power, and the latest WAVE-2 AC wireless technologies, these products are ideal as staples in both residential and commercial applications. .
Araknis Networks Wireless Access Point Quick Start Guide Step 2: Install A Ceiling Mount Step 3: Connect B Wall Mount C In-Ceiling Mount ENABLED Internet Router PoE Switch WAP POWER + DATA (OUT) AN-ACC-INJ-30W DC 48V Input Power ENABLED Internet DATA (IN) Router Switch PoE Injector (not included) WAP Router Switch WAP DC Power Supply (not included) ENABLED Internet NOTE: Use the ceiling backing plate on top of acoustic ceiling tiles to prevent the mounting nuts from pulling through
Araknis Networks Wireless Access Point Quick Start Guide Step 4: Verify Step 6: Log Into Web Interface A Log in using the default credentials: LED* Username araknis Password araknis B *NOTE: The LED is located on the side of the device. NOTE: If you can’t connect to the WAP using this method, or need to configure the device before connecting it to the network, try these options for accessing your device: LED Status: • • 10 • DHCP IP address – Page 11 Blinking: WAP is not working correctly.
Araknis Networks Wireless Access Point Quick Start Guide Pro Tip: Save and Apply Changes Other Access Methods: DHCP IP Address After making changes to settings on a menu page, left-click the “Save” button on the menu to hold the new settings in the Apply Changes field. The WAP is configured to DHCP by default so that the DHCP server can assign an IP address when the WAP is connected to the network (the DHCP server is usually the router). This address can be used for accessing the web interface.
Araknis Networks Wireless Access Point Quick Start Guide Other Access Methods: Default IP Address Other Access Methods: Default IP Address If the WAP is not issued an IP address on the network, or needs to be accessed while not connected to a network, you can configure your computer's network connection to allow access using the default IP address, “192.168.20.253”. Windows 7 screenshots shown for reference. Windows 7 screenshots shown for reference.
Araknis Networks Wireless Access Point Quick Start Guide Other Access Methods: Default IP Address Other Access Methods: OvrC Windows 7 screenshots shown for reference. OvrC gives you remote device management, real-time notifications, and intuitive customer management, right from your computer or mobile device. Setup is plug-and-play, with no port forwarding or DDNS address required.
Contacting Technical Support P (866) 838-5052 E techsupport@araknisnetworks.com 2-Year Limited Warranty Araknis Networks® products have a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified, or disassembled.