Aramo Smart NavigatorII-100 ASNII-100 User’s Manual Aramo Smart Navigator SKIN DIAGNOSIS SYSEM
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
Aramo Smart NavigatorII-100 Content 1. How to use 2. How to operate • System setting • Wireless & network setting 3. How to diagnosis • Full mode • View mode 4. How to set 5.
System and components How to use ① ② ⑨ ③ ⑩ ⑪ ⑫ ⑭ ⑬ ④ ⑤ ⑥ ⑦ Number ⑧ Function Number Function ① Moisture/Elasticity sensor ⑧ SD memory card slot ② LED light & Lens ⑨ On / Off ③ Touch screen ⑩ No function ④ Go to "Setup" ⑪ Volume on MP3 ⑤ Capture button ⑫ Volume on MP3 ⑥ Go to "Back" ⑬ Capture button ⑦ External Adaptor connection ⑭ Battery cover Manual 2 Batteries Charger USB cable Cleaning cloth Sebum paper (100 paper) Hand strip Cradle Leather case Touch pen
Battery uses How to use Open the cover. Insert the battery. Close the cover. Battery front side How to charge By Battery charger Charge the unit after connecting the cable. By Cradle Plug the charger into the cradle and connect the device to the cradle. Available to re-charge the spare bat tery on back side of cradle.
Use the touch screen How to use The touch screen lets you select items or perform function. Learn basic actions to use touch screen. • Tap : Touch once with your finger to select or launch the menu option, or application • Drag : Tap and drag your finger up, down, left, or right to move to items on lists. • Tap and hold : Tap an item and hold it for more than 2 seconds to open pop-up option list • Double-tap : Tap twice quickly with your finger to zoom in or out while viewing photos.
Icons to operate in Manual How to use Icons To do Touch to take images from the device Go to capturing page OK Cancel USE Analysis 3D OK Go back to previous page Use the image taken for diagnosis Analyze the image 3D Image Go back to previous page on skin image Mode Note Change the lighting mode * Touch the “>” or fling the screen to go to next page. * Tap the screen to focus.
Turn on / off & System main page * Tap in red box How to operate_ Turn on/off - On/Off button: Press and hold for 3 seconds - “Sleep” mode on / off : Press the button Turning on… Go to “setup” page Turning off… Go back to system main page Icons To do Icons To do Diagnosis application Alarm Gallery (album) Add alarm MP3 Internet System setting
How to set the system * Tap in red box How to operate_ System setting ≫ Application setting Check the “√” mark. The setting have to be a ctivated to download ap plication. ≫ Brightness setting Adjust the Brightness to display the application more effectively.
How to set the system * Tap in red box How to operate_ System setting ≫ Language setting Keyboard language ② ① Deactivate Select the language you want to use Changed the keyboard language
How to set the system * Tap in red box How to operate_ System setting ≫ Language setting How to change the keyboard language Press and hold the “space-bar” to show the language selection Drag left or right to choose the language How to change the System language Select the language you want to use
How to set the system * Tap in red box How to operate_ System setting ≫ Date & Time setting How to set date Enter the current date How to set time zone & time Select user’s time zone or city name Enter the current time
How to set the system How to operate_ System setting ≫ Wi-Fi connection ① Tap “setup”.
How to set the system * Tap in red box How to operate_ System setting ≫ Bluetooth Pairing How to pair the diagnosis system with the host device Note * Host device : all kinds of PC including tablet PC you want to send the diagnosed result or the related images. Check the name of host device Activate the Bluetooth function on host device for the diagnosis system to search and pair with host device. ← Example image On host device Accept the paring request sent from diagnosis system.
How to set the system How to operate_ System setting ≫ Bluetooth Pairing How to change the name of diagnosis system Enter the device name what you want * Tap in red box
Diagnosis Process ≫ How to setup * Tap in red box How to operate_ setting Tap “setup”. ≫ Language ≫ Option Drag * Show measurement page before starting diagnosis. - Green: activate status - Gray: deactivate status Select the language ≫ Measurement Green : activate → Analyze Gray : deactivate → Do not analyze Select what you want to diagnose * Show the diagnosed result by number on the capture page.
Diagnosis Process ≫ How to setup * Tap in red box How to operate_ setting Tap “setup”. ≫ Language ≫ Option Drag * Show measurement page before starting diagnosis. - Green: activate status - Gray: deactivate status Select the language ≫ Measurement Green : activate → Analyze Gray : deactivate → Do not analyze Select what you want to diagnose * Show the diagnosed result by number on the capture page.
Diagnosis Process ≫ How to setup ≫ Advance ≫ Network How to operate_ setting Selected status Unselected status Check the version of application Set Wireless connection; Wi-Fi or Bluetooth ≫ Email Enter the ID (ex. abcd1234) Enter the Domain (ex. @gmail.com) Enter the Password (ex.
Diagnosis Process ≫ Full mode * Tap in red box ≫ Start diagnosis How to diagnose_ Full mode Note * Gray : deactivate status * Black : activate status Enter age group and gender of customer ≫ Hydration & Elasticity Place the sensor onto your skin and tap Note * Do NOT move during the measurement.
Diagnosis Process ≫ Full mode * Tap in red box ≫ Sebum ( T & U zone) How to diagnose_ Full mode Put the below sebum tape (pink area) onto the U or T-zone of your face for 3 seconds.
Diagnosis Process ≫ Full mode ≫ Sebum ( T & U zone) How to diagnose_ Full mode Tap Tap each image to magnify Analysis Tap Note to go back to “Sebum-U/T” page. * Touch the “>” or fling the screen to go to next page. * Tap the screen to focus. * Take the image without any white blank.
Diagnosis Process ≫ Full mode ≫ Pore How to diagnose_ Full mode Tap. Analysis Drag Tap 3D Note 3D image * Touch the “>” or fling the screen to go to next page. * Tap the screen to focus.
Diagnosis Process ≫ Full mode * Tap in red box ≫ Melanin How to diagnose_ Full mode Tap. Analysis ≫ Sensitivity Tap. Analysis ≫ Wrinkle Choose the area by moving the white box Note Tap. * Touch the “>” or fling the screen to go to next page. * Tap the screen to focus.
Diagnosis Process ≫ Full mode ≫ Wrinkle How to diagnose_ Full mode Tap 3D 3D image ≫ Acne Tap Note Analysis * Touch the “>” or fling the screen to go to next page. * Tap the screen to focus.
Diagnosis Process ≫ Full mode ≫ Analysis result How to diagnose_ Full mode Note * Product recommendation : to be updated * Tap in red box
Diagnosis Process ≫ Full mode * Tap in red box ≫ Send How to diagnose_ Full mode Enter the customer’s email address.
Diagnosis Process ≫ View mode * Tap in red box ≫ NL mode (for Wrinkle) How to diagnose_ View mode Tap Mode to change the lighting mode. Choose the area by moving the white box Turn to USB storage… 3D image ≫ PL mode (for Melanin) Tap Mode Note to change the lighting mode. * Touch the “>” or fling the screen to go to next page. * Tap the screen to focus.
Diagnosis Process ≫ View mode * Tap in red box ≫ UV mode (for Acne) How to diagnose_ View mode Tap Mode UV Note to change the lighting mode. UV UV * Touch the “>” or fling the screen to go to next page. * Tap the screen to focus.
How to update the application Note * Tap in red box * Check the Wi-Fi connection before updating How to set the ASNII-100 ② ② ① ① Drag down
How to remove the application How to set the ASNII-100 On System main page Find “Smartnavi” application.
How to re-install the application after removing * Tap in red box How to set the ASNII-100 Drag down ② ① On System main page Enter the address below and download the application www.aramhuvis.com/data/asn2/smartnavi.
Standard & Features Section Item Contents Optical/Camera Camera 5M pixel CMOS Sensor X30,X60 TPL Additional information HW AF VCM Sensor Hydration Light Normal, Polarize, UV-[3CH] CPU S5PV210 ARM-CORTEX A8 [1GHz] Memory DDR2 SDRAM (512MB) / NAND FLASH (512MB) SD Memory T-Flash (Micro SD) LCD 2.2Inch TFT LCD QVGA (240*320) Touch R-TOUCH Wi-Fi Wireless 802.11b/g/n (Wi-Fi Direct Avail) Bluetooth BT ver3.0+HS Audio AC97 , Codec (WM1800) SPEAKER Max 1.
Troubleshooting Guide & FAQ I cannot turn on the device. • Connect and charge the device (or the battery) using the adaptor provided the supplier. (The battery charging indicator will be shown on the system main page.) Additional information I cannot power on the device even the battery is still full. • The battery might be dislocated on the device. Please separate the battery from the de vice and put it on, and then power on again. The battery is not charging very well.
Troubleshooting & FAQ I cannot connect to Wi-Fi. • Check the connection status on setting page. • Try to connect to another Wi-Fi. • - Bluetooth : Check the pairing status and try to re-pair the device with host device. Additional information I cannot connect to Blue-tooth. • Make sure to use the Bluetooth hosting devices that have Bluetooth certified with the logo. You may need an external Bluetooth dongle for those devices that do not have Bluetooth feature.
CAUTION UPON INSTALL & USE Thanks for using the product of Aram HUVIS Co., Ltd.. The product undergoes strict quality management and inspection process before production and introduction to market. Product defect or trouble during warranty period is entitled to free repair. Additional information Model Serial No. Date of Purchase Customer Name Place of Purchase Contact Information Please, fill out warranty and keep it with receipt to enjoy better service in the future.
CAUTION UPON INSTALL & USE 1. Humidity Do not install the product in the place with rain leakage or of high humidity. If the product is leaking, it may cause damage or fire. 2. Repair Additional information Do not disassemble or remodel the product because it may cause danger such as an electric shock. When a problem occurs, do not attempt to repair it. Instead, contact the seller. 3. Electricity Do not use electricity except for what is prescribed here.
Aramo Smart NavigatorII-100 Rm.801 Byucksan Technopia, # 434-6 Sangdaewon-dong, Jungwon-gu, Seongnam-city, Gyeonggi-do, KOREA 462-716 TEL [82-31] 732.6320 FAX [82-31] 732.6330 E- MAIL info@aramhuvis.com WEBSITE www.aramhuvis.
