User Instructions

ArapahoTechnologiesInc. LiquidAider™ DraftMay2019Instructions

BUTTON OPERATIONAL NOTES

The button operates in “momentary mode” or “burst mode”:

 Momentary Mode: As long as you press the trigger button, water squirts in

your mouth.

 Burst Mode: One quick trigger button press will squirt water for 2, 3, or 4

seconds.

To Set Burst Mode: On the button cap, there are 4 LED lights and a square “mode

button”. The little mode button is used to select one of 4 modes:

 Top LED: Momentary – hold trigger button and water squirts until you let off.

 2

LED: A single press of the trigger button operates the pump 2 seconds.

 3

LED: A single press of the trigger button operates the pump 3 seconds.

 4

LED: A single press of the trigger button operates the pump 4 seconds.

To cycle through the modes, press the little white mode button twice and it will

cycle to the next mode. You can do this while riding.

Return to momentary mode: press the square mode button until the top LED is lit.