User Instructions
Arapaho Technologies Inc. LiquidAiderâ„¢ Draft May 2019 Instructions
Mount the nozzle in the front of the helmet. Use small zip ties or safety wire to
mount the nozzle. If using wire, be careful that you do not damage the nozzle body
by over tightening. You will need to exit the front of the helmet with the zip tie or
wire. In this assembly the grill screen was cut, but if smaller zip ties or wire were
used, no cutting would be required.
You do not need a large zip tie like in this photo. A small zip tie will not damage
your grill. Also notice how loose it is. This has over 500 miles of forest, sand,
desert and slickrock riding and worked perfectly. Don’t over tighten the nozzle!
The helmet tube just slides into the open end of the nozzle.