User Instructions

Arapaho Technologies Inc. LiquidAider™ Draft May 2019 Instructions
ASSEMBLE FOR USE
1. With the pump battery connected, use the square power button on the pump to
turn on the pump. If the pump does not receive a signal in 4 hours, then it will
turn off. Press the square power button to turn it back on.
2. Slide the full water bladder, pump, tube, and antenna into the backpack.
3. Route the tube, antenna, and magnetic disconnect backflow preventer out the
top of the pack.
4. Secure the tube and backflow preventer using the backpack tube loops if
desired.
5. Put on your hydration backpack.