Installation Guide

MANUAL USUARIO FINAL
VC 2700
2
Casa Matriz
Av. Golfo de Arauco 3666
Parque Industrial Coronel
Coronel – Chile
Fono: (56) 41 – 928100
Fax: (56) 41 – 928109
6.- TOP COAT TYPES
It is always recommended to carry out a simple compatibility test
between the top coat and the primer prior to final paint application.
Tapel Willamette Inc. S.A. recommends the use of water base latex type
products, acrylics, vinyl acrylics, and styrene acrylics as top coat, since
their high resistance and durability along with the characteristics of our
product provide excellent, lasting coating results.
7.- TOP COAT APPLICATION
For top coat application, traditional methods such as brush, roller, gun,
etc can be used. If thicker coats are to be applied, previous
sandpapering is recommended.
8.- CAPABILITIES OF THE PRIMER
The capabilities of the WilPro VC 2700 primer are listed below:
Adhesion to substratum *: ISO 2409, GT3 or higher
ASTM D 3359, 3B or higher
ASTM D 4541, 5 Kgf/cm2 or higher
Exposure to UV light * : ASTM G 53, 100 hours without
detaching or cracking
Exposure to environment ** : 30 days under normal conditions
* Laboratory tests
**Specified test
(*) Capabilities defined on dry, 1,0 mil thick film without dilution.
Sucursal
Av. España 1127
Valdivia – Chile
Fono: (56) 63 – 299770
Fax: (56) 63 – 299771
w w w . t a p e l . c l
[e-mail]