Replacement Part List

ATTACHING THE WINGS

Wing to Arch Assembly

If you want to install the Wings with your Arboria Arch Screen (base panel) there are two

ways to do so, depending on your preference as to final appearance.

If you would like the Wings and Arch to form a straight line (or have the Wings hinge

away from the front of the Arch Screen):

Place the Base Panel and Wing Panel side by side. Open the hinge and place one hinge

flap on the back of Wing and the other on the back of Base Panel, 6” from the top of the

Wing Panel. Using the ¾” hinge screws (see image), attach the hinge to both parts. Re-

peat 6” from the bottom using another hinge. Attach the second wing using the same

procedure.

If you would like the Wings to Arch attachment to form a concave shape (or have the

Wings hinge toward the front of the Arch Screen):

The hinge must be attached between the side edges of the Base Panel and the Wing Panel

side by side with the hinge pin facing outward (see image). Pivot the Wing Panel and

open the hinge and place one hinge flap on the edge of the Wing and the other on the

edge of the Base Panel, 6” from the top of the Wing Panel. Using the ¾” hinge screws,

attach the hinge to both parts. Repeat 6” from the bottom using another hinge. Attach

the second wing using the same procedure.

Landscape Screen Wings

Left-hand Wing Panel (staples facing back)

Right-hand Wing Panel (staples facing back)

Stakes (2) & Wood Screws 1 5/8” (4)

Hinges (4) 2 per wing

Hinge Screws (16) 8 per wing

NOTE: If you have purchased the Wing Panels without

the Arch Screen you will have 2 spare hinges.

EACH WING PAIR COMES WITH THE FOLLOWING:

Wing Panel to Wing Panel Attachment Assembly

Position Wings in the desired location and in the desired angle. Be sure to align panels

such that the staple-free face of each panel is to the desired side. Hinge placement will

affect how the Wing Panels connect. There are two basic choices:

1) Hinge on the back of Panels - Open hinge and place one flap on the back of each

Wing Panel, 6” from the top of the Wing Panel. Using the ¾” hinge screws (see im-

age at right). Attach the hinge to both parts. Repeat 6” from the bottom using another

hinge.

2) Hinge similarly, but between the panels to allow the opposite movement.

Wing Wing

Arch Screen

(Sold separately)