Instruction manual

W
ood Jaw
Wood Blade
M5 x 25
Bolt
Attach the Wood Jaw accessory by sliding the Wood Jaw into the
mounting slot.
Once the Wood Jaw accessory is in place, fit the M5 x 25 Allen Bolt and
tighten firmly.
CAUTION: THE WOOD JAW ACCESSORY ALLOWS THE AS160 TO CUT
SOFT MATERIALS SUCH AS WOOD, PLASTIC AND RUBBER. KEEP
ALL LIMBS WELL AWAY FROM THE CUTTING BLADE, AS IT MAY
CAUSE INJURY.
NOTE: KEEP POWER CORD AWAY FROM BLADES AT ALL TIMES
CAUTION: DO NOT FORCE THE TOOL WHEN CUTTING . THE AS160
USES A DRIVE BELT, WHICH WILL SLIP IF THE BLADES SHOULD
JAM. EXCESSIVE SLIPPING WILL WEAR THE BELT PREMATURELY.
9. SPECIFICATIONS
ITEM SPECIFICATION
Cutting depth/width 120mm (4 3/4”)/6.5mm (
1
/4”), (depending on blade/material)
Weight, with cutting blades 4.3kg (9.5lb)
Dimensions without blades 415 mm (16
11
/32”) L
75 mm (3”) W
210 mm (8 1/4”) H
Noise level 96dB max. at 1.0 m (3’ 3”)
Vibration level: 6.9m/s
2
No load speed n
0
6,500rpm
Rated operating time: 4min
Rated resting time: 1min
Electrical rating, nominal 230-240 VAC, 50Hz, 900W (Australia)
230 VAC, 50 Hz (Europe)
110 - 120 VAC, 50-60 Hz (USA/CANADA/UK Industrial)
Dust extraction
vacuum hose inter
face 30mm (1
3
/16”) ID, EN 60335-2-69
Belt tension 1 mm (
1
/16”) maximum mid-span deflection with
25 N (2.5 kg) (5lb) deflection force
Blade mount bolt tor
que
16 Nm (1.6 kg-m), (11.5ft-lb), un-lubricated
AS160 17