Instruction manual

Keep this manual for further reference.
1. Know you power tool: read the owner’s manual carefully. Know its applications and
limitations to avoid potential hazards.
2. Warning: Do not remove any parts as specified on page 5 (Knowing your tool).
3. Wear approved safety glasses: when operating a power tool.
4. Wear hearing protection: when operating a power tool.
5. Wear lung protection: during dusty operations.
6. Wear correct safety clothing: wear close fitting clothes and not loose clothes. Do not
wear jewellery. Tie back or conceal long hair.
7. Take care around grounded surfaces: pipes, radiators, ranges or refrigerators can
lead to electrical shock if touched while using electrical power tools.
8. Avoid dangerous environments: do not use electrical tools in wet or damp
conditions or in rain. Ensure a well lit work area.
9. Keep work area clean: an untidy work area can be obstructive and lead to injury.
Rules for safe operation of electrical equipment 2
Read all instructions
The Arbortech Mini Grinder is designed and built to meet and exceed
Australian and International Safety Standards.
Use only Arbortech approved or other qualified service centres for the
servicing and/or repair of this tool. For further assistance contact Arbortech.
The Arbortech Mini Grinder is double insulated to provide the highest
possible operator protection from electric shock. Please observe all
necessary safety precautions to avoid electric shock. Do not operate this tool
until you have read and understood all safety instructions and rules of
operation. Failure to comply with these instructions can result in serious
accidents including fire, electric shock or serious personal injury.