Instruction manual

10. Secure the workpiece: to avoid serious personal injury.
11. Do not remove guards or shields: these are designed to increase operator safety.
12. Store idle tools in dry, out of reach places: When not in use the tool should be
stored in a dry, frost free location not within the reach of children.
13. Use the right tool: use the correct sized tool for the job. For example, do not try to
use the Mini Grinder to cut thick boards, bricks or pipes.
14. Keep away from children and visitors: bystanders must wear all correct safety
equipment. Do not let people touch a running tool.
15. Do not force the tool: the Mini Grinder is designed to operate at a specific speed
and the correct blade will enhance its performance in different materials. Force will not
increase the operating speed.
16. Maintain your tool carefully: Keep blades sharp. Keep the ventilation slots of the
power tool clean at all times and prevent any foreign matter from entering. Follow the
cleaning and maintenance instructions.
17. Avoid accidental starting: always ensure the tool is switched off before pluging in.
Do not carry with fingers on the switch.
18. Do not use tool if on/off switch is faulty: contact your authorised service centre.
19. Disconnect tools: when not using, changing blades, or servicing, always unplug the
tool from the power source.
20. Inspect the tool cord periodically: if damaged have it repaired by an authorised
service centre. Keep cord well away from the cutting blade.
21. Keep handles dry and clean: always use a clean cloth to clean the Mini Grinder. Do
not use solvents or petroleum based products.
22. Do not abuse cords: Do not carry by the cord. Do not pull plugs from the socket by
the cord. Do not coil the cord. The power cord of the tool and any extension cord used
should be checked frequently for damage. If damage has occurred, have the cord
replaced by an authorised service facility and replace the extension cord.
23. Check for damaged parts: before every use, inspect components for damage.
Check belt alignment and condition periodically. Check the extension arm is securely
fitted to the tool body. Check all bindings, mountings and moving parts for wear.
3 Rules for safe operation