Instruction manual

24.Stay alert: Make sure you are well balanced when using the tool and you have
secure footing. Don’t use the tool when you are tired. Use common sense and care
during operation.
25. Cleaning: If the outer case of the motor needs cleaning do not use solvents but a
moist soft cloth only.
26. Lubricating: The grease in the gearbox will require replacement/replenishment after
extensive use of the grinder. Please see your appropriate service agent to provide this
service.
27. Do not use this tool when under the influence of drugs, alcohol or medication.
28. Keep hands away from the cutting area: always keep hands well away from the
blade. Do not reach underneath the workpiece during operation. Do not move or
remove the workpiece while operating this tool.
29. Guard against kickback: kickback occurs when the tool is stalled rapidly. Avoid
kickback by not twisting the blade in the workpiece and using only the bottom edge of
the blade to cut. Switch off immediately if the tool stalls.
Approach the workpiece slowly when lowering the blade into the cut.
30. Outdoor extension cords: when using the Mini Grinder outdoors, use only approved
extension cords.
31. Use only correct blades: use only Arbortech replacement blades with this tool. Only
use correct sized and intact washers. Use blades which are suitable for the purpose.
32. Never: touch the blades during use!
33. Never: start the machine with any part of the blade touching the workpiece.
34. Never: set down the tool before the blades have come to a complete stop.
35. Save these instructions for future reference and to save money.
Rules for safe operation 4