Instruction manual

7 Operation
• To change blades or sanders, unscrew the
cutter clamping bolt fully using the Allen™
key provided.
Place a flat head screwdriver into the Mini-
Grinder spindle lock (seen in fig.5) and
remove blade (as shown in fig.6).
Place new blade securely on the small
pulley.
Place top washer over blade and secure using
the cutter clamping bolt (as shown in fig.6).
Check that the blade is sitting flat against
the small pulley.
• Also packed with the Mini-Grinder is a set
of 4 assorted Mini-Sanders (40, 60, 80 &
120 grit).
To replace the blade with the sander,
unscrew the cutter clamping bolt fully
using the Allen™ key provided.
Remove blade. Insert HEXAGONAL BOLT into
the mini-sander keyway and wind into the
mini-grinder spindle in place of the
cutter.(as shown in fig.7).
Hold spindle lock as per fig.5.
Fig.5
Fig.6
Fig.7