Instruction manual

7 Operation
BLADES
1 To change blades place a flat head
screwdriver into the Mini Grinder
spindle lock and hold (seen in fig .5)
then unscrew the cutter clamping bolt
by using the Allen key provided and
remove blade ( as shown in fig 6)
2 Place new blade securely on the small
pulley. Ensuring that the blade is sitting
flat against the pulley.
3 Place top washer over blade and secure
using the cutter clamping bolt ( as
shown in fig 6) then tighten
SANDERS
To replace the blade with sanders follow
step 1 to remove blade.
Insert HEXAGONAL BOLT into the mini
sander keyway and wind into the mini-
grinder spindle in place of the cutter ( as
shown in fig 7 ) using the screwdriver for
securing.
Fig.5
Fig.6
Fig.7