Operating instructions

3
If overflow occurs, turn off the main water supply before calling a service. If there is water in the base pan because of an overfill
or small leak, the water should be removed before restarting the dishwasher.
Long inlet time. Tap is not opened.
Long draining time. The installation position of the drain pipe is too high.
Longer heating time,
but not reaching required temperature
Malfunction of temperature sensor or heating element.
Overfilled.
Too much inlet water. .
Failure of temperature sensor Open circuit or break of temperature sensor
Short circuit or break of temperature sensor
Failure of temperature sensor
For heavy soiled loads,
such as , plates,glasses
and lightly soiled pans.
standard daily cycle.
pots
For the heaviest soiled loads,
such as pots,pans,casserole
dishes and dishes that have
been sitting with dried food
on them for a while.
For normal soiled loads,such
as plates,glasses,bowls and
lightly soiled pans.
For dishes that need to be
rinsed and dried only.
For lightly soiled loads,
such as glasses, crystal* and
fine china.
To rinse dishes that you
plan to wash later that day.
Ashorterwashforlightly
soiled loads that do not
need drying.
Intensive
Rinse
Rapid
Glass
Soak
Pre-wash
(AS/NZS 2007.1 )
5/25 g.
Pre-wash
wash(50℃)
Rinse (70℃)
Drying.
5/25 g.
Pre-wash
Wash (50℃)
Rinse
Rinse (70℃)
Drying.
Wash
Wash(50
Rinse (60 )
Drying.
Pre-
℃)
Rinse
℃
Wash
Rinse (70℃)
Drying.
15 g.
Pre-wash
Wash (50℃)
Rinse (60℃)
Drying.
15 g.
Wash (50℃)
(50℃)Rinse
(
50
℃)
5/25 g.
* Some crystal may become cloudy when placed in a dishwasher. Please check with the crystal manufacturer’
s recommendations on cleaning.
161 mins
149 mins
142 mins
81 mins
112 mins
55 mins
9mins