Manual

Arc Machines, Inc. Model 307 Orbital Tube Welder Training
Document No. 740096 Chapter 2. Page 3.
Rev. A
DON’TS
1. Don’t GRIND near the Weld Head or Power Supply
without protecting them.
2. Don’t use acid or other corrosives on or near the
Weld Head. A
LIGHT APPLICATION OF ISOPROPYL ALCOHOL
(IPA) is the only approved liquid for cleaning of weld
heads or the Model 307.
3. Don’t attempt to weld without a secure
BARE METAL
WORK (GROUND) CONNECTION when using the Manual TIG
Torch.
4. Don’t attempt to weld without PROPER FACING AND
CLEANING OF THE MATERIAL to be welded. Use only
approved cleaning products.
5. Don’t drop the Weld Head, Remote Pendant,
Cables, or Power Supply. Precautions should be taken
to secure this equipment in production situations.
6. Don’t route the cables where they will be
SUBJECT TO
DAMAGE from traffic or equipment.
7. Don’t expose the Weld Head, Remote Pendant,
Cables, or Power Supply to
RAIN OR STANDING WATER DUR-
ING OPERATION. Do not operate equipment when wet.
8. Don’t pull on cables. This will result in
DAMAGE TO THE EQUIPMENT.